Are you planning to buy custom wire refrigerator shelves from manufacturers in china? We are here to help you find the right manufacturer for your needs.
Wire refrigerator shelves manufacturers are the ones who manufacture the wire shelves used in refrigerators. They are responsible for making sure the shelves fit properly inside the fridge and they need to be sturdy enough to hold up against heavy loads.
The wire shelves come in different sizes and shapes depending on what type of fridge you have. Some fridges require flat wire shelves while others require curved wire shelves.
Table of Contents
Custom Wire Shelves for Refrigerator
Fridges and freezers typically come with some shelves but they’re rarely used efficiently for their intended purpose. When it comes to choosing between wire shelvers and customized shelvers, restaurant owners and food service companies must choose which type of shelver meets their needs best.
How to Custom Make Wire Refrigerator Shelves
Refrigerator and freezer temperatures are especially critical at these frigids temperatures because improperly designed wire could become brittle and break. If you store food in a refrigerator, freezer, or both, there are several things you should know about wire shelves.
First, it’s important to understand what type of wire you’re using. You can use either copper or aluminum wire, depending on whether you want to support high or low voltage applications. Copper wire is better suited for supporting low voltage loads, while aluminum is used for medium voltage applications.
Next, make sure you choose quality wire shelf material that is specifically designed for refrigeration or freezer environments. This includes insulation that is rated for the specific environment, as well as strength requirements.
Finally, keep in mind that refrigerators and freezers operate within certain temperature ranges. For example, According to USDA standards for properly storing food, refrigerators must maintain 32 to 40 degrees Fahrenheit, while freezers must remain at 0 degrees Fahrenheit. These temperatures affect how much energy is needed to run the appliance, so it’s very important that wire shelves meet those specifications.
So, wires used for shelves in refrigerators and freezers must be designed to withstand freezing and below-freezing temperatures. This includes wire that supports the shelves themselves. If you use wire that isn’t specifically designed for refrigeration or freezer applications, it may break or crack over time.
The best way to avoid this problem is to make sure the wire you’re using meets the appropriate specifications. You’ll want to look for specific information about the material being used. For example, some wire might say “for refrigeration,” while another says “for freezer.”
If you don’t see any specifics, ask your supplier what type of wire is recommended for your application. They should know since they are the ones manufacturing the wire.
You can also check out our Wire Shelves Guide. There we explain how to choose the correct wire for your needs, how to install it correctly, and how to care for it.
Wire Refrigerator Shelving Temperatures
Properly maintaining refrigerator and freezer shelves requires keeping them within certain temperature ranges. According to USDA guidelines, refrigerated shelf life is between 32 and 40 degrees Fahrenheit, and freezer shelf life is between 0 and 5 degrees Fahrenheit. Therefore, wire shelving needs to be able to handle both above and below zero degrees.
At these frigid temps, refrigerator and freezers’ temperature is especially important because poorly made wires could get brittle and crack or break. You can use the wire materials below.
Stainless Steel Wire:
Stainless steel wire is an excellent material for refrigerators and freezers because it holds up well at extremely cold temperatures (-148°F) and is resistant to corrosion. However, stainless steel isn’t rustproof and usually performs best when there’s less moisture in the air.
Carbon Steel Wire + Dipping:
Carbon steel is the most commonly used material for freezer racks, being strong and inexpensive. Dip plastic, also known as thermal dip plastic, is a plastic coating process, according to the different raw materials used in dip plastic can be divided into liquid dip plastic and powder dip plastic.
- Dip molding has the following characteristics.
A wide range of color configurations can be configured in a variety of colors, can also be configured hard glossy surface, soft glossy surface, fine hairy surface, coarse hairy surface, matte, or luminous dipping liquid. - Strong adhesion of the coating film, low-temperature resistance, impact resistance, wear resistance, humidity and heat resistance, salt spray resistance, tensile resistance, acid and alkali resistance, aging resistance, high-pressure resistance, chemical resistance, excellent weather resistance, open-air use will not produce cracks and other properties.
- The electrical insulation performance of the coating film is excellent, even when immersed in salt water solution, it can maintain its characteristics.
- The dipping solution does not contain toxic and heavy metal ions, antibacterial and environmental protection, the raw materials can be recycled, and the thickness of the coating film can be controlled. Almost no three wastes are produced in the production process, and the production conditions are mild, which is conducive to environmental protection.
- Good flexibility of coating film, excellent tensile strength and elongation at break
To determine shelf temperature, customized wire shelves may be useful. For example, powder coating includes using thermoset resins, which allows the wire shelver to retain its chemical and mechanical properties even when exposed to extremely hot or cold environments. If you want to buy wire shelves that can stand the heat of an oven or the coldness of refrigerators and freezers, know that they have thermoset resins that will ensure their ability to withstand the high temps required.
If you understand the manufacturing process, you’ll be able to better decide whether or not a particular type of refrigerator shelf can handle extreme temperature changes. You might even consider discussing the materials used in a specific item with the producer, or considering hiring a professional to create a customized shelve for your refrigerator and freezer.
FAQ of Custom Manufacturing Wire Refrigerator Shelves
There are several factors you should consider when choosing fridge and freezers wire shelving. Here are some of those factors:
What are the considerations?
There are a lot of considerations that have to be made when picking out custom refrigerator shelving for food processing operations if you’re going to maximize safety, health, and productivity.
1. Rust Resistance
2. Health Inspection Violation Listings
3. Cost Effectiveness
4. Suitability For Coolers And Fridges
5. Sanitation
What’s the lowest temperature of the wire refrigerator shelves?
The optimal temperature for storing perishable foods is between 3 to 5 °C (37 to 41 °F). The U.S. FDA recommends keeping refrigerators at or below 4 °C (40 °F) and that the freezer be regulated at −18 °C (0 °F).
The lowest temperature of the wire fridge shelves is -18 degrees Fahrenheit (-28 Celsius). To keep food fresh, the shelves should be kept below freezing temperatures. However, the shelves may freeze slightly above 0 degrees Farenheit (32 degrees C), depending on the type of freezer and the amount of insulation around the shelves.
Some freezers have insulated shelves that are designed to keep foods frozen without getting too cold. These shelves are made of plastic and metal and are placed inside the freezer compartment.
Other freezers have non-insulated shelves that are designed to hold items near freezing temperatures. These shelves are made only of metal and are placed outside of the freezer compartment. Both types of shelves can be damaged by extreme heat.
The temperature of the wire shelves in your refrigerator is going to depend on two factors: 1) the type of food you store in the fridge, and 2) the amount of space available inside the fridge.
Therefore, it’s best to avoid placing hot pans or dishes on these shelves.
What are the risks?
One weak shelf could break suddenly, dumping all of its contents onto lower shelves, the floor, or even unfortunate nearby employees—damaging products while also creating health and safety hazards for workers.
Raw meats, fruits, vegetables, and many other items could make direct contact with a shelf in the refrigerator, which could have consequences if the wrong material is chosen.
Are wire shelves in refrigerators better than glass shelves?
As wire shelves can allow more air to circulate and give cooling from all sides thus keeping the items fresher.
Wire Shelves are also very easy to clean, as they don’t have any gaps or crevices that could trap dirt and dust.
What are the dangers of using semi-absorbent materials?
This can lead to discoloring of the shelf and potentially transferring contaminants to the next piece of meat to be stored there.
6 Tips Before Custom Wire Shelving
Looking for a price estimate or want to know what wire shelving options are out there? Let us help! We offer free estimates and detailed product reviews for all types of metal shelving products. Simply fill out our form here, include your contact info, and we’ll get back to you within 24 hours.
Consider These 6 Things Before Purchasing Custom Refrigerator Shelving
1. What’s the Lowest Temperature the Shelf Will Be Exposed to?
2. What Products and Ingredients Are Likely to Come into Contact with the Shelf’s Surface?
3.Maximum Load Weight Per Shelf;
4. Dimensions of the Refrigerator;
5. Shelf Material and Surface;
6. Sanitation Considerations.
Request A Quote
View More Wire Refrigerator & Freezer Products
